2-in-1 Pick & Decoder
Pick AND decode a lock like a pro - for the price of lunch.
A keyway-specific 2-in-1 tool that picks and decodes at the same time. The guided path lifts you pin-by-pin; the etched depth grid reads the key code for you. No lockpicking skills needed.
- Hardened stainless build - finesse, not force.
- It actually opens AND decodes - not a keychain toy.
Etched decode gridHow It Works
Pick and decode in one motion.
The guided path does the hard part. You follow four simple steps - no single-pin-picking feel to master first.
Seat the tool in the keyway
Retract the lifter arm to protect the tip, then ease the flat blade in until the shoulder seats against the plug. Never force it.
Apply light tension
Use the tension arm to put gentle rotational pressure on the cylinder - just enough to hold each pin as it sets.
Lift each pin along the guided path
The keyway-matched path lifts one pin at a time. You feel each pin set - the guidance replaces the skill you'd need with a bare pick set.
Read the depth off the etched grid
As each pin sets, read its depth against the graduated scale etched into the body. That reading is the lock's bitting code.
The result
The lock rotates open - and you now hold the pin-depth code, ready to cut a working key on one of the brass blanks.
See It In Action
Watch it open a real lock.
Close-up clips of the tool picking and decoding real cylinders. No editing tricks - just the pins setting and the grid reading.
Built To Be Used, Not Displayed
Where cheap clones break, this one is built to survive real use.
The clone reputation is fragile tips and sloppy fit. Here is the actual build - stainless body, a protected lifter arm, and an etched decode grid that reads true. No embellishment, just the parts that matter.
Stainless body, delicate tip - respected, not abused
The blade and lifter tip are the working edge of the tool. Made from stainless steel and designed for finesse, not force - used along the guided path the way it is meant to be, it opens lock after lock instead of snapping on the first one.
A protected lifter arm
Retract the lifter arm to the rear before you insert the tool and the delicate tip is shielded on the way into the keyway - the single biggest cause of a broken clone, designed out.
An etched, graduated decode grid
The pin-depth scale is etched into the body, not printed - so it stays readable use after use. Set each pin, read its depth off the grid, and you hold the code to cut a working key.
In The Box
What's in the kit - no hidden upsells.
Everything you need to prep the lock, pick it, read the code, and cut a working key. Nothing sold separately.
-
The 2-in-1 pick & decoder
The stainless key-shaped tool with the lifter arm, tension arm, and etched decode grid - the whole pick-and-read workflow in one piece.
-
A set of brass key blanks
Used to prep the lock by exercising the pins, and to cut a permanent working key once you've read the code off the grid.
-
Keyway-specific by design
This is a keyway-matched tool, so the guided path fits its intended cylinders. Check the listing for the exact profile it covers.
Reviews
Beginners and pros - same verdict.
From people opening their first lock to locksmiths who keep one in the van as a cheap backup.
Completely new to this. Opened my first lock the same day it arrived. Honestly did not expect that.
Grabbed it as a van backup for the price of a coffee. Tolerances are better than I expected for the money - it seats and works.
Reads the code cleanly off the grid every time. Cut a working key from the first decode.
I was fully expecting junk at this price. It's not. Used it about fifteen times now and it's held up fine - you just have to be gentle with it like every guide says. For the money it's a genuine steal.
Does exactly what a 2-in-1 should. Not the genuine, doesn't pretend to be - and I didn't pay genuine money.
Perfect way to trial a keyway before committing to the expensive tool. Exactly the low-risk test I wanted.
Questions & Answers
Everything you're wondering, answered.
The honest answers - including the durability question everyone asks first.
Not if you use it the way it's designed to be used. The lifter tip is delicate on every 2-in-1 tool, genuine ones included. It's stainless-bodied and holds up to repeated correct use - the rule is finesse, not force. Retract the lifter arm before inserting, ease it in, and use light tension. Forced, any of these tools break; handled right, this one lasts.
It genuinely does both. You pick the lock by lifting each pin along the guided path, and as each pin sets you read its depth off the etched grid on the body. That reading is the lock's key code - you can cut a working key from it on one of the included brass blanks. It's the real 2-in-1 workflow, not a novelty.
Yes. The blade is finished to slide in and seat cleanly against the plug without the sloppy wobble cheap clones are known for. It's a keyway-specific tool, so it's matched to its intended cylinders - that fit is what makes the guided path work.
This is a keyway-specific 2-in-1, so it's designed to fit its matched cylinder profile. Check the product listing above for the exact keyway this unit covers before ordering - a keyway-specific tool only works on its intended profile.
This is a standard professional and hobbyist locksmith tool. Ownership rules vary by region - in most places it's perfectly legal to own for practice on your own locks. Check your local laws, and only ever use it on locks you own or have permission to open.
Free shipping worldwide on every order. If it's not for you, there's a 30-day money-back guarantee - no risk to try it. It's also covered by a 1-year warranty.
Risk-Free
30 days to prove it opens - or your money back.
The downside is basically nothing. The upside is a real working pick and decoder for the price of lunch. Try it - if it's not for you, send it back.
Try It Risk-Free30-day money-back guarantee · Free shipping worldwide · 1-year warranty